Сверхпроводники в электроэнергетике | Сверхпроводники в электроэнергетике

НИЦ «КУРЧАТОВСКИЙ ИНСТИТУТ», Курчатовский комплекс НБИКС-технологий, Отделение сверхпроводимости

Авторизация | Карта сайта | Помощь English

Вы запросили Авторы: Lei L.
Показаны 21−40 из 43	< предыдущая 1 2 3 следующая >	Показать все

Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Shi Y., Jin H., Lei L., Tan Y.F., Liu H.J., Yu M., Liu F., Guo L., Hong Z.Y.

Development of an YBCO coil with SSTC conductors for high field application

Ключевые слова: HTS, YBCO, coated conductors, coils pancake, fabrication, design parameters, magnetic field distribution, critical caracteristics, critical current, ac magnetic field dependence, current-voltage characteristics, experimental results

Physica C, 2018, v.550, N , p.10-13

Полный текст на Sci-Hub

Дополнительная информация

Shi Y., Li J., Lei L., Wu Y., Liu H., Liu F., Qin J., Ma H.

Experimental Study on Bi-2212 Cable-in-Conduit Conductor

Ключевые слова: HTS, Bi2212/Ag, cable-in-conduit conductor, fabrication, high pressure processing, heat treatment, PIT process, joints, joint resistances, critical caracteristics, current-voltage characteristics, critical current, magnetic field dependence, self-field effect, distribution, experimental results

IEEE Transactions Applied Superconductivity, 2018, v.28, N 4, p.4802104

Полный текст на Sci-Hub

Дополнительная информация

Wang Y., Wang S., Zhang P., Li L., Zhao L., Li C., Zhao G., Lei L., Jin L., Jia J., Oshima Y.

A compositional gradient Ce1-xZrxO2 buffer architecture for producing high-performance YBCO film

Ключевые слова: HTS, YBCO, films epitaxial, substrate single crystal, chemical solution deposition, buffer layers, gradient, X-ray diffraction, temperature dependence, fabrication, microstructure, critical caracteristics, Jc/B curves, pinning force, resistive transition, resistivity, experimental results

Materials Characterization, 2018, v.142, N , p.383-388

Полный текст на Sci-Hub

Дополнительная информация

Wang Y., Wang S., Zhang P., Li L., Li C., Zhao G., Lei L., Jin L., Jia J., Oshima Y.

Highly (001)-oriented zirconium-doped ceria films grown on biaxially textured nickel tungsten substrates through an inorganic-salts-based chemical solution deposition route

Ключевые слова: HTS, coated conductors, fabrication, buffer layers, films epitaxial, chemical solution deposition, substrate Ni-W, microstructure, X-ray diffraction, resistive transition

Ceramics International, 2018, v.44, N 13, p.16025-16029

Полный текст на Sci-Hub

Дополнительная информация

Liu X., Zhao G., Lei L., Fang X., Jia J.

High efficiency preparation of Bi2Sr2CaCu2O8+d superconducting thin films by an acetate based Sol-Gel process

Ключевые слова: HTS, Bi2212, thin films, films epitaxial, sol gel process, fabrication, microstructure, substrate LaAlO3, precursors, heat treatment, oxygenation treatments, X-ray diffraction, resistive transition, resistivity, temperature dependence, critical temperature

Materials Chemistry Physics, 2018, v.216, N , p.153-157

Полный текст на Sci-Hub

Дополнительная информация

Liu X., Li L., Zhao G., Lei L., Fang X., Jia J.

Preparation of Bi2Sr2CaCu2O8+d-YBa2Cu3O7-d Bilayer Films by Acetate Based Photosensitive Sol-Gel Method

Ключевые слова: HTS, Bi2212, YBCO, multilayered structures, films epitaxial, fabrication, sol gel process, heterostructures, substrate LaAlO3, X-ray diffraction, texture, resistance, temperature dependence

IEEE Transactions Applied Superconductivity, 2018, v.28, N 5, p.7501006

Полный текст на Sci-Hub

Дополнительная информация

Zhao G., Lei L., Jia J.

Effects of Pb(Zr0.52Ti0.48)O3 polarization on the YBa2Cu3O7-x electrical transport and magnetization

Ключевые слова: HTS, YBCO, sol gel process, substrate LaAlO3, ferromagnetic coating, fabrication, PLD process, X-ray diffraction, microstructure, magnetization, hysteresis, resistive transition, resistance, temperature dependence, heterostructures, current-voltage characteristics

Materials Research Express, 2017, v.4, N 3, p.36001

Полный текст на Sci-Hub

Дополнительная информация

Zhao G., Lei L., Wu C., Nishii J., Duan Z.

Preparation of YBa2Cu3O7-x/Y2O3/YBa2Cu3O7-x Trilayer Films Using Sol-Gel Method

Ключевые слова: HTS, YBCO, multilayered structures, fabrication, sol gel process, thin films, substrate LaAlO3, X-ray diffraction, microstructure, magnetization, resistive transition, resistivity, temperature dependence, critical caracteristics, current-voltage characteristics

J Superconductivity Novel Magnetism, 2017, v.30, N 7, p.1719-1725

Полный текст на Sci-Hub

Дополнительная информация

Shi Y., Li J., Jin H., Lei L., Wu Y., Liu H., Liu F., Qin J., Ci L.

Experiment of joints resistance and critical current of Bi2212 conductor

Ключевые слова: HTS, Bi2212/Ag, PIT process, jacket, stainless steel, cable-in-conduit conductor, fabrication, test results, critical caracteristics, current-voltage characteristics, joint resistances, experimental results

Fusion Engineering Design, 2017, v.122, N , p.228-231

Полный текст на Sci-Hub

Дополнительная информация

Li C.S., Wang Y., Zhang P.X., Sulpice A., Yu Z.M., Lei L., Feng J.Q., Jin L.H., Zhao G.Y.

Optimization of fluorine content in TFA-MOD precursor solutions for YBCO film growth

Ключевые слова: HTS, YBCO, films, TFA-MOD process, substrate LaAlO3, substrate Hastelloy, precursors, fabrication, phase formation, microstructure, critical caracteristics, critical current density, composition

Superconductor Science Technology, 2016, v.29, N 1, p.15001

Полный текст на Sci-Hub

Дополнительная информация

Wang S., Wang X., Liu L., Zhang P., Li C., Zhao G., Lei L., Jin L., Wu C., Jia J.

Strongly improved current-carrying capacity induced by nanoscale lattice strains in YBa2Cu3O7-d – Ba0.7Sr0.3TiO3 composite films derived from chemical solution deposition

Ключевые слова: HTS, YBCO, composites, films, lattice parameter, strain effects, chemical solution deposition, nanoscaled effects, substrate LaAlO3, buffer layers, microstructure, pinning force, critical caracteristics, Jc/B curves, resistive transition, resistivity, temperature dependence, experimental results

J Materials Chemistry C, 2016, v.4, N 7, p.1392-1397

Полный текст на Sci-Hub

Дополнительная информация

Wang Y., Sulpice A., Zhang P., Yu Z., Li C., Zhao G., Lei L., Feng J., Jin L.

Development of Low Fluorine Solution for YBCO Film Growth

Ключевые слова: HTS, YBCO, MOD process, coated conductors, substrate Ni-W, fabrication, X-ray diffraction, microstructure, critical caracteristics, current-voltage characteristics

IEEE Transactions Applied Superconductivity, 2016, v.26, N 3, p.7500504

Полный текст на Sci-Hub

Дополнительная информация

Zhang X., Bai Y., Zhao G., Lei L., Wu C.

Carbon Dioxide Controlled Thermal-Decomposition Reactions for Preparation of High Quality YBCO Films Derived from Fluorine-Free Solution

Ключевые слова: HTS, YBCO, films, substrate LaAlO3, fluorine-free process, sol gel process, fabrication, critical caracteristics, Jc/B curves, quality control

J Superconductivity Novel Magnetism, 2014, v.24, N 1, p.23-26

Полный текст на Sci-Hub

Дополнительная информация

Liu B., Lei L., Wu Y., Liu H., Liu S., Liu F.

NbTi Strands Verification for ITER PF CICC Process Qualification of CNDA

Ключевые слова: LTS, NbTi, cable-in-conduit conductor, coils poloidal field, ITER, strands, critical caracteristics, current-voltage characteristics, control systems, magnetization

J Physics: Conference Series, 2014, v.507, N 3, p.32029

Полный текст на Sci-Hub

Дополнительная информация

Bruzzone P., Fang L., Lei L., Feng L., Yu W., Bo L., Yi S., Jinggang Q.

Manufacture and Acceptance Test of the Full Size ITER PF5 Conductor Sample

Ключевые слова: LTS, cable-in-conduit conductor, NbTi, fabrication, test results, coils poloidal field, ITER, design parameters, ac losses, dc performance, current sharing, minimum quench energy, SULTAN

IEEE Transactions Applied Superconductivity, 2012, v.22, N 3, p.4805404

Полный текст на Sci-Hub

Дополнительная информация

Lu Y., Sun J., Zeng P., Qu T., Lei L., Fang G.L.

The influence of electroplastic rolling on the mechanical deformation and phase evolution of Bi-2223/Ag tapes

Ключевые слова: HTS, Bi2223/Ag, tapes, fabrication, mechanical treatment, pulsed current

J Materials Science, 2010, v.45, N 13, p.3514-3519

Полный текст на Sci-Hub

Дополнительная информация

Chen Y., Zhao G., Lei L., Yan F., Qu G.

Fluorine-free sol–gel preparation of YBa2Cu3O7-x superconducting films by a direct annealing process

Ключевые слова: HTS, YBCO, films, sol gel process, annealing process, fluorine-free process, fabrication, substrate LaAlO3

J Alloys Compounds, 2010, v.505, N 2, p.640-644

Полный текст на Sci-Hub

Дополнительная информация

Zhao G., Lei L., Zhao J., Xu H.

Water-Vapor-Controlled Reaction for Fabrication of YBCO Films by Fluorine-Free Sol-Gel Process

Ключевые слова: HTS, YBCO, fabrication, sol gel process, fluorine-free process, films, substrate LaAlO3, critical caracteristics, current-voltage characteristics

IEEE Transactions Applied Superconductivity, 2010, v.20, N 5, p.2286-2293

Полный текст на Sci-Hub

Дополнительная информация

Liu X., Chen Y., Zhao G., Lei L.

Effect of copper content in precursor solution on the superconducting properties of YBCO films derived from low-fluorine solution

Ключевые слова: HTS, YBCO, films, composition, fluorine process, fabrication, substrate LaAlO3, coatings

Physica C, 2008, v.468, N 23, p.2317-2321

Полный текст на Sci-Hub

Дополнительная информация

Liu X., Chen Y.(yuanqing_chen@126.com), Zhao G., Lei L.

High rate deposition of thick YBa2Cu3O7-x superconducting films using low-fluorine solution

Ключевые слова: HTS, YBCO, films thick

Superconductor Science Technology, 2007, v.20, N 3, p.251-255

Полный текст на Sci-Hub

Дополнительная информация

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.

Авторы: Lei L.

Development of an YBCO coil with SSTC conductors for high field application

Experimental Study on Bi-2212 Cable-in-Conduit Conductor

A compositional gradient Ce1-xZrxO2 buffer architecture for producing high-performance YBCO film

Highly (001)-oriented zirconium-doped ceria films grown on biaxially textured nickel tungsten substrates through an inorganic-salts-based chemical solution deposition route

High efficiency preparation of Bi2Sr2CaCu2O8+d superconducting thin films by an acetate based Sol-Gel process

Preparation of Bi2Sr2CaCu2O8+d-YBa2Cu3O7-d Bilayer Films by Acetate Based Photosensitive Sol-Gel Method

Effects of Pb(Zr0.52Ti0.48)O3 polarization on the YBa2Cu3O7-x electrical transport and magnetization

Preparation of YBa2Cu3O7-x/Y2O3/YBa2Cu3O7-x Trilayer Films Using Sol-Gel Method

Experiment of joints resistance and critical current of Bi2212 conductor

Optimization of fluorine content in TFA-MOD precursor solutions for YBCO film growth

Strongly improved current-carrying capacity induced by nanoscale lattice strains in YBa2Cu3O7-d – Ba0.7Sr0.3TiO3 composite films derived from chemical solution deposition

Development of Low Fluorine Solution for YBCO Film Growth

Carbon Dioxide Controlled Thermal-Decomposition Reactions for Preparation of High Quality YBCO Films Derived from Fluorine-Free Solution

NbTi Strands Verification for ITER PF CICC Process Qualification of CNDA

Manufacture and Acceptance Test of the Full Size ITER PF5 Conductor Sample

The influence of electroplastic rolling on the mechanical deformation and phase evolution of Bi-2223/Ag tapes

Fluorine-free sol–gel preparation of YBa2Cu3O7-x superconducting films by a direct annealing process

Water-Vapor-Controlled Reaction for Fabrication of YBCO Films by Fluorine-Free Sol-Gel Process

Effect of copper content in precursor solution on the superconducting properties of YBCO films derived from low-fluorine solution

High rate deposition of thick YBa2Cu3O7-x superconducting films using low-fluorine solution